Rigaku ResQ CQL

Rigaku ResQ CQL



Griffin G510

Person-Portable GC-MS Chemical Identifier

Availability: In stock

The FLIR Griffin™ G510 Gas Chromatograph Mass Spectrometer (GC/MS) is a versatile, person-portable chemical identifier. It complements presumptive techniques used during emergency missions, by enabling responders to analyze all phases of matter (liquid, solid, vapor) and by performing rapid field- confirmation of chemical hazards. The integrated heated sample probe enables hot zone operators to identify vapor-phase chemical threats within seconds when operated in Survey Mode. The integrated split/splitless injector allows for environmental, forensic, and hazardous material sampling via syringe injection of organic liquids. The 9” on-board touchscreen delivers automated user controls and can be operated while wearing full personal protective equipment downrange. It is built with an IP65-rated enclosure for harsh environments and supports passive defense, interdiction, elimination, and consequence management missions. Long-lasting, on-board batteries ensure every mission is supported from beginning to end.

Analyze Solids, Liquids, and Vapors

Integrated syringe injector and heated sample probe for analyzing all phases of matter. Limited maintenance and no service module required.

Lab-Quality, Mission-Ready GC-MS

Identify unknowns with NIST library and confidently take action with guided controls and simple threat alarms. You don't need a Ph.D. to use the G510.

Touchscreen Operation While In PPE

Completely self-contained, with large touchscreen, long-lasting batteries, carrier gas, and IP65-rated, spray-resistant enclosure. Take it in the field with confidence.

More Information
Manufacturer FLIR
Write Your Own Review
You're reviewing:Griffin G510
System Overview
Data Storage Internal 256GB SSD
Decontamination Sealed for Survey Mode operation in hot-zone; IP65-rated enclosure is dust-tight and spray-resistant
Training Requirements 2 hours basic operation; 8 hours expert user
Operating Temp & Humidity 32 to 104 °F (0 to 40 °C); <95% relative humidity
Storage Temperature -13 to 131 °F (-25 to 55 °C)
Physical Features
Dimensions (L x W x H) 13.25 x 13.25 x 15.75 in (33.7 x 33.7 x 40 cm)
Weight 36 lbs (16.3 kg) - includes batteries, carrier gas, and vacuum system
Battery life 4 hrs in Survey Mode, 2 hrs in Confirmation Mode; hot swappable
Power Supply 100-240V 50-60Hz (220 W max); 19V (DC); 2 x #2590 @15V Li Ion batteries (included)
Start Up Time 15 minutes to full operation from cold
Sampling and Analysis
Sample Introduction Heated Sample Probe (included standard) - Vapor survey mode via Membrane Introduction Mass Spectrometry (MIMS) Inlet - Vapor confirmation via Internal Dual-Bed Preconcentrator Split/splitless injector (included standard) accepts: - Direct liquid sampling (organic solution) via syringe - Liquid extraction via SPME fiber or PSI-Probe w/ Gerstel Twister™ * - Solid PSI-Probe™ thermal separation via TAG™ * *optional accessories
Sample Phase Solid, liquid, and vapor
Sampling & Analysis Full identification in 4-15 mins for most chemicals; identification wthin seconds (near real-time) when operating in Survey Mode
Standard Reference Database NIST/EPA/NIH Mass Spectral Library
Threats Detects and identifies explosives, narcotics, CWAs, TICs, environmental pollutants, and other chemicals
System Interface
Alerts Audible and Visual (Touchscreen and Handheld Probe)
Communication 2 x USB 2.0, Bluetooth 4.0, WiFi 802.11n, Ethernet via USB, integrated GPS
Display 9" Multitouch Color Display (1280x720 WVGA;1300 nits brightness)
Software GSS Touch; multiple user levels
  • Lab, gold-standard linear quadrupole mass analyzer
  • Full NIST chemical library for field identification and analysis of unknown materials and mixtures
  • Simple on-board touchscreen with automated user controls
  • Visual and audible alarm confirmation with limited data interpretation
  • On-board WiFi and GPS assist in maintaining result defensibility
  • Vapor sampling probe with rapid-response survey mode
  • Integrated split/splitless liquid injector accepts direct injection of organic liquids
  • Available Prepless Sample Introduction (PSI) Probe with Touch-And-Go (TAG™) capability for direct analysis of solid samples
  • Effortlessly links with SPME and headspace sample collection tools
  • High-fidelity, low thermal mass (LTM) GC column for unsurpassed resolution in challenging environments
  • IP65-rated, dust-tight and spray-resistant
  • Built-in active pumping system eliminates need for an external service module
  • Integrated carrier gas, batteries, and training reference videos
  • Simple field maintenance activities for increased uptime
  • Extensive training, service, and support options available