Proactive Hurricane® XL Stainless Steel Submersible Pump
SKU
PS-10415
Regular Price $1,995.00 Special Price $1,645.00

The Stainless Steel Hurricane XL® pump is capable of pumping up to 150 feet from ground level by simply connecting it to a controller and 12 volt battery. Its reliable design is suitable for continuous purging of groundwater wells. Proactive's Stainless Steel Pumps are patented for their unique design (#7584785). The Stainless Steel Hurricane XL® is capable of pumping up to 150 feet from ground level to water level. Simply, connect the pump connector to the Low Flow with Power Booster 2.5 XL "LCD" Controller, then to a 12 volt battery, energizing the pump.

Pumping Depth (DTW) Gallons Per Minute 12V
10 2.75
20 2.5
30 2.18
40 2.25
60 2.2
70 2.1
80 2.0
100 1.9
110 1.75
120 1.5
130 1.25
150 1.0
  • The Stainless Steel Hurricane XL® can operate under harsh conditions with higher turbidity.
  • The Stainless Steel Hurricane XL® has been installed in hundreds of remediation sites using pump and treat systems.
  • The Stainless Steel Hurricane XL® can also be used with solar panels for long term remediation sites!
  • Simple to use! Runs off any 12 volt DC batteries.
  • Lifts up to 150 feet deep from ground level to water level!
  • Reliable design is suitable for continuous purging of groundwater wells.
  • Low Flow Sample as low as 10 M/L per minute, from any depth, when using the Low Flow with Power Booster 2.5 XL "LCD" Controller and Non-Return Check Valve (Sold Seperately).
  • Easy to read LCD display conveniently placed on top of the Low Flow with Power Booster 2.5 XL "LCD" Controller makes adjusting and reading the discharge rate a breeze!
  • Computer engineered bottom debris filter screen allows operation under harsh conditions with higher turbidity.
  • Long lasting, high performance pump motor lasts over 400 hours under normal working conditions.
  • Simple to clean and decontaminate!
Specifications
POWER CONSUMPTION 920 WATTS (MAX)
VOLT RECOMMENDATION 12-15 At Source
MAXIMUM AMP OUTPUT 36 AMPS
MEASUREMENTS LENGTH 7.5" / DIAMETER: 1.82"
CONSTRUCTED HIGH POLISH STAINLESS STEEL
REQUIRED
TUBING 3/8" ID POLY TUBING
SUPPLIED WITH 160 FEET OF HEAVY DUTY 10 GAUGE WIRE, ADDITIONAL MOTOR MODULE, DISPOSABLE LOW FLOW CONTROL VALVE, AND WRENCH