Solinst Model 101 Water Level Meter 100'

Model 101 Water Level Meters are the industry standard for portable hand operated water level meters. They are sturdy, easy to use and read accurately to 1/100 ft. or each millimeter. Model 101 Water Level Meters use corrosion proof stainless steel probes attached to permanently marked flat tape. The probes incorporate an insulating gap between electrodes. When contact is made with water, the circuit is completed, activating a loud buzzer and a light.

Rental Rates
Daily $ 20.00
Weekly $ 55.00
Monthly $ 170.00
For more Information on the Solinst Model 101 Water Level Meter 100'
Solinst Model 101 Water Level Meter 300'

Model 101 Water Level Meters are the industry standard for portable hand operated water level meters. They are sturdy, easy to use and read accurately to 1/100 ft. or each millimeter. Model 101 Water Level Meters use corrosion proof stainless steel probes attached to permanently marked flat tape. The probes incorporate an insulating gap between electrodes. When contact is made with water, the circuit is completed, activating a loud buzzer and a light.

Rental Rates
Daily $ 25.00
Weekly $ 65.00
Monthly $ 195.00
For more Information on the Solinst Model 101 Water Level Meter 300'
Solinst Model 101 Water Level Meter 500'

Model 101 Water Level Meters are the industry standard for portable hand operated water level meters. They are sturdy, easy to use and read accurately to 1/100 ft. or each millimeter. Model 101 Water Level Meters use corrosion proof stainless steel probes attached to permanently marked flat tape. The probes incorporate an insulating gap between electrodes. When contact is made with water, the circuit is completed, activating a loud buzzer and a light.

Rental Rates
Daily $ 35.00
Weekly $ 95.00
Monthly $ 290.00
For more Information on the Solinst Model 101 Water Level Meter 500'
Solinst Model 101 Water Level Meter 1000'

Model 101 Water Level Meters are the industry standard for portable hand operated water level meters. They are sturdy, easy to use and read accurately to 1/100 ft. or each millimeter. Model 101 Water Level Meters use corrosion proof stainless steel probes attached to permanently marked flat tape. The probes incorporate an insulating gap between electrodes. When contact is made with water, the circuit is completed, activating a loud buzzer and a light.

Rental Rates
Daily $ 45.00
Weekly $ 125.00
Monthly $ 350.00
For more Information on the Solinst Model 101 Water Level Meter 1000'
Heron Water Level Meter 300'

The dipper-T water level meter is a topline, top quality instrument used for measuring static and falling head levels in wells and boreholes. The dipper-T in static mode is used for measuring the depth of water in wells, boreholes and standpipes. The dipper-T in drawDown mode may be used for measuring falling water levels during purging, well development and for low flow sampling; helping to protect your pumps from damage caused by dry running. The premium padded carry case comes included to protect your precision instrument from the elements.

Rental Rates
Daily $ 25.00
Weekly $ 65.00
Monthly $ 195.00
For more Information on the Heron Water Level Meter 300'
Solinst Model 122 Interface Meter 100'

Solinst Oil/Water Interface Meters give clear and accurate measurements of product level and thickness in wells and tanks. Determination of both light (floating) non-aqueous phase liquids (LNAPL) and dense (sinking) non-aqueous phase liquids (DNAPL) is quick and easy. The factory-sealed probe is pressure proof (up to 500 psi). The 5/8" (16 mm) diameter probe allows easy access through tight spaces and into narrow wells. The probe is designed for use in various monitoring applications.

Rental Rates
Daily $ 40.00
Weekly $ 130.00
Monthly $ 400.00
For more Information on the Solinst Model 122 Interface Meter 100'
Solinst Model 122 Interface Meter 200'

Solinst Oil/Water Interface Meters give clear and accurate measurements of product level and thickness in wells and tanks. Determination of both light (floating) non-aqueous phase liquids (LNAPL) and dense (sinking) non-aqueous phase liquids (DNAPL) is quick and easy. The factory-sealed probe is pressure proof (up to 500 psi). The 5/8" (16 mm) diameter probe allows easy access through tight spaces and into narrow wells. The probe is designed for use in various monitoring applications.

Rental Rates
Daily $ 45.00
Weekly $ 145.00
Monthly $ 445.00
For more Information on the Solinst Model 122 Interface Meter 200'
Solinst Model 122 Interface Meter 300'

Solinst Oil/Water Interface Meters give clear and accurate measurements of product level and thickness in wells and tanks. Determination of both light (floating) non-aqueous phase liquids (LNAPL) and dense (sinking) non-aqueous phase liquids (DNAPL) is quick and easy. The factory-sealed probe is pressure proof (up to 500 psi). The 5/8" (16 mm) diameter probe allows easy access through tight spaces and into narrow wells. The probe is designed for use in various monitoring applications.

Rental Rates
Daily $ 50.00
Weekly $ 150.00
Monthly $ 460.00
For more Information on the Solinst Model 122 Interface Meter 300'
Solinst 122 Mini Interface Meter 65'

The 122M Mini Interface Meter is a more portable version. It is small enough to fit in a backpack, yet rugged and reliable. It comes with PVDF cable in 80 ft or 25 m lengths. It shares the same probe, and certifications as the 122 Interface Meter.

Rental Rates
Daily $ 40.00
Weekly $ 130.00
Monthly $ 400.00
For more Information on the Solinst 122 Mini Interface Meter 65'
Heron HOIL Meter 100'

The H.OIL oil, water interface meter is used to measure the interface level between two liquids in the same tank, vessel, well or aquifer. The dissimilar density of two liquids means the lower density, non-conductive product will float on top of the higher density, conductive liquid . Denser products will tend to sink , creating a layer under the water. The premium padded carry case comes included to protect your precision instrument from the elements.

Rental Rates
Daily $ 40.00
Weekly $ 130.00
Monthly $ 400.00
For more Information on the Heron HOIL Meter 100'
GeoTech Interface Meter 100'

The Geotech Interface Meter can be used in numerous applications including measuring oil and water levels in monitoring wells, detecting tank leakage and obtaining accurate measurements of water levels. When the Geotech Interface Meter is lowered down a well and contacts the product layer, a solid tone and green light alarm is activated on the reel. When the probe detects water, the tone begins to oscillate and the light changes to red.

Rental Rates
Daily $ 40.00
Weekly $ 130.00
Monthly $ 400.00
For more Information on the GeoTech Interface Meter 100'
Solinst Model 107 TLC Meter

The Model 107 TLC Meter is ideal for profiling conductivity and temperature. The 3/4" (19 mm) diameter probe is attached to Solinst PVDF flat tape; accurately laser marked every 1/100 ft or each millimeter. The conductivity range is from 0-80,000 µS/cm. Conductivity and temperature measurements are displayed on a rotating LCD screen on the face of the reel.

Rental Rates
Daily $ 45.00
Weekly $ 145.00
Monthly $ 445.00
For more Information on the Solinst Model 107 TLC Meter
Eno Scientific Well Sounder

The Well Sounder 2010 PRO is a sonic water level meter to measure static water level in wells, piezometers or boreholes. This portable handheld unit uses sound waves to measure the distance from the top of the well to the water level. This eliminates the need to lower anything into the well.

Rental Rates
Daily $ 40.00
Weekly $ 130.00
Monthly $ 400.00
For more Information on the Eno Scientific Well Sounder
Solinst Levelogger Edge

The Levelogger Edge records highly accurate groundwater and surface water level and temperature measurements. It combines a pressure sensor, temperature detector, 10-year lithium battery, and datalogger, sealed within a 7/8" x 6.25" (22 mm x 159 mm) stainless steel housing with Titanium based PVD coating.

Rental Rates
Daily $ 25.00
Weekly $ 75.00
Monthly $ 215.00
For more Information on the Solinst Levelogger Edge
Solinst Levelogger Direct Read Cable 50' - 220'

When it is desired to get realtime data and communicate with Leveloggers without removal from the water, they can be deployed using Direct Read Cables. This allows viewing of the data, downloading and/or programming in the field using a portable computer, DataGrabber, or the Solinst Levelogger App and Interface.

Rental Rates
Daily $ 5.00
Weekly $ 15.00
Monthly $ 45.00
For more Information on the Solinst Levelogger Direct Read Cable 50' - 220'
Solinst Levelogger Gold Kit

Levelogger Gold Kit includes everything you need to run a Levelogger Gold. The Levelogger Gold itself, a Leveloader Gold, Direct Read USB Communications Package, and a 50 foot Direct Read Cable Assembly. Ideal for automatic recording of water levels in a wide range of groundwater and surface water applications including wells, lakes, streams, harbors, tanks, etc.

Rental Rates
Daily $ 70.00
Weekly $ 210.00
Monthly $ 630.00
For more Information on the Solinst Levelogger Gold Kit