QED’s Power Pro ESP low-flow electric sampling pump has an all-in-one design with user friendly controls built into the reel. Run the Power Pro off your vehicle’s battery, or go mobile in the field using a portable 12 VDC battery. The ESP Communications Protocol provides simple pump operation with sophisticated control. The In-Water Sensor lights up when the pump is submerged, making it easy to position the pump in the well. The Run-Dry Protection limits drawdown and prevents damage to the motor and seal. This unique combination pump 50-75% less power which means less heat and lighter, more flexible power supply options. Lower power consumption lets you sample more wells than with any other electric sampling pump. The whole system weighs 32 lbs.
The Geotech Geopump Series II Peristaltic Pump is designed for single and multi-stage pressure or vacuum pumping of liquids. They operate by mechanical peristalsis, so the sample only comes in contact with the tubing. This allows for consistent sample integrity as well as easy cleaning and replacement.
The Masterflex E/STM portable sampler is an ideal peristaltic pump for environmental sampling due to its ease-of-use, power versatility and portability. The variable-speed motor is capable of up to 400 revolutions per minute (rpm), reverse flow and prime/purge action. The internal rechargeable 12 volt DC battery allows the user to operate the pump for up to four hours without power backup; an AC or 12 volt DC power source will operate the pump indefinitely.
The SS Monsoon pump is capable of pumping up to 120 feet from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous sampling of groundwater wells. Low Flow Sample as low as 10 ML per minute, from any depth, when using the Low Flow with Power Booster 2 Controller.
The SS Hurricane pump is capable of pumping up to 150 feet from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous sampling of groundwater wells. Low Flow Sample as low as 10 M/L per minute, from any depth, when using the Low Flow with Power Booster 2.5 Controller.
The SS Mega-Monsoon pump is capable of pumping up to 200 feet from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous sampling of groundwater wells. Low Flow Sampling as low as 10 M/L per minute, from any depth, can be achieved with the Low Flow with Power Booster 3 Controller.
The Sample Pro Portable MicroPurge Pump is the first pump developed specifically to bring the advantages of low-flow sampling to sites where groundwater samples are collected from many monitoring wells with the same pump. The Sample Pro Pump is easy to disassemble, without any tools, and simple to clean to eliminate any potential cross contamination. That includes the exclusive Sample Pro disposable bladder, which snaps in and out without any clamps, so they can be discarded after each well is sampled.
The MP50 puts you in control of the most advanced low-flow sampling system ever made. You will purge and sample quickly and easily, with precise, steady low-flow pumping rates from one sampling event to the next. QED’s new basics equipment is also designed to take advantage of the opportunities for downsized equipment, which is lighter and more portable, reduces equipment cost and increases sampling crew productivity. Simplified, sealed electronics are put together in a design that delivers famous QED durability and value.
The MicroPurge MP10 Controller revolutionizes low-flow ground water sampling with advanced logic control of purge flow and well drawdown. Simple up-down arrow keys increase and decrease purge flow to meet low-flow requirements. Once optimized, settings can be easily recalled in the next round of sampling.
The 3020 Compressor is a useful option for low-flow sampling of wells at depths to 200 feet. It runs on a 12 volt DC electrical supply, and can be connected to your vehicle's battery with the supplied cables, or driven by a separate power source. At just 15x11x6-1/2" and 15 pounds, it offers an extremely convenient, portable pneumatic power choice for many sampling systems.
The 6712 Portable Sampler features a vacuum-formed ABS plastic shell to withstand exposure and abuse. Its tapered design and trim 20-inch (50.8 cm) diameter result in easy manhole installation and removal. Plug-in 700 Series Modules and the SDI-12 interface make it easy to add flow and parameter monitoring to the 6712-based system. Programming is fast and simple, with on-line help just a key stroke away.
The GLS Sampler is designed for general purpose or priority pollutant sampling in municipal and industrial applications where a full-size sampler is too large. It collects composite samples, based on time or flow intervals, in 1- or 2.5-gallon glass or polyethylene bottles, or in 2-gallon disposable ProPak bags.
The Waterra Hydrolift is a portable, electrically operated device that is used to automate the operation of the Inertial Pump. The Hydrolift is powered by a 3/4 horsepower electric motor available in 110 volts and generates a 4 inch stroke at up to 200 cycles per minute. The Hydrolift weighs only 35 pounds and requires an electrical power supply of at least 1000 watts. This actuator is optimized to operate with the Standard Flow System up to its maximum effective depth and will operate with the High Flow System up to a depth of 150 feet. This actuator is the ideal choice for the frequent user of the Inertial Pumping System with moderate to extreme pumping requirements.